RRRG new website top logo resized

 

Restoration diary

Reports of restoration work on 50029 and 50030.

Recovering parts acquired from Rodney Group

A large amount of heavy boulders blocking the path to the container where our purchased spares were.

On Friday 29th June 2012, Sarah and myself set off together with our trusty hound Toby to meet up with the contacted transport company at a site near Worcester to collect electrical items we had purchased from 50021 Rodney Group, this also included a Radiator Fan Motor and Traction Motor Blower for the D400 Fund.

When we arrived at site, we introduced ourselves to the Lorry Driver Nigel Chapman. The first problem we encountered was that due to the heavy deluge the day before, a delivery of large boulders had been delivered and dumped in front of the grounded curtain-sided truck body that our items were being stored in.

After a little head scratching it was decided we could get into the other side of the body if we removed the site security fencing. When we obtained access to the other side of body, the next obstacle was to release the tensioning mechanism, which through the passage of time had sunk into the ground, and after some digging with spades and persuasion with the site dumper truck which lifted the sunk body out of the ground we gained access.

We moved some fencing to gain access to the other side of the container.

With the transport lorry manoeuvred into position and stabiliser legs down the next problem encountered was a temperamental hydraulic hi-ab which with the technical know-how of Nigel, eventually played ball. The first two items strapped up and lifted out were the Cubicle and Rad Fan Motor. The two compressors and traction motor followed soon after. The items were secured down and we then drove to where the traction motor blowers and spare power unit (ex-50045) were stored. One blower motor was lifted and secured down.

We needed the site dumper truck to force our way in...


RRRG's main purchase, the electrical cubicle, safely loaded onto the lorry.

Once everything was checked to be secure we set off on our journey North, up the M5, M42 etc heading for Derbyshire with Bowers Electrical being our first port of call. We had anticipated the journey to be difficult with the usual Friday afternoon traffic, however also had the added problem of road closures along the A6 between Derby and Rowsley due to the Olympic Torch relay, fortunately the journey went without delay or incident. At Bowers we had the assistance of a forklift and very quickly off-loaded D400 Fund's Rad Fan Motor and Blower Motor together with our two compressors.

RRRG's haul included two genuine Class 50 compressors, ex-50011, seen being guided onto the lorry.


We then set off for Rowsley, arriving at site about 4:45pm, where we were met by local “BG” resident Dave Rolfe. Once on site we discovered one of our ETH generators (in worse condition than the others, which is why it was never sent for overhaul) was obstructing the route of the lorry to our storage shed, incidentally we also needed this moving, so with the Hi-ab on site we took advantage and relocated it dropping it near Renown together with the Traction Motor.

A further spare traction motor was also included in the deal.


A short break was had whilst we retired to the BG for a brew. Once refreshed we returned to our storage shed to off-load the electrical cubicle although this was not without problems as the hi-ab could not manoeuvre the cubicle all the way into the shed so with a solid steel bar and some brute force we pushed the cubicle in. Space in the shed being what it was, we had to man-handle the cubicle in at an angle until the doors could be closed and locked.  Everything was then sheeted up, secured and we eventually left for site calling at Frankie & Bennies for a very well earned bite to eat and pint, eventually getting back home some 15 hours after starting out earlier that morning.

After some manhandling to make it fit the available space inside RRRG's designated facility, the newly-purchased cubicle was safely stored awaiting future work. With this final act, a long and satisfying day finally came to an end!

A big thank you to Nigel Chapman the jovial lorry driver, who was a tremendous help on the day, enjoy your retirement!!  Photos by Sarah McCall.

AGM
Collecting gas bottles

Related Posts

Comments 4

 
Guest - Tim Snowball on Thursday, 02 August 2012 23:06

Yes Paul items needing protection are covered.

Yes Paul items needing protection are covered.
Guest - Paul Sturm on Friday, 13 July 2012 22:10

What a terrific day's work you have done. Under abominable conditions as I understand (........digging out the spanner for the sliding curtain out of the mud .........). Thanks a lot Sarah, Steve, Dave and the lorrydriver of course!

What a terrific day's work you have done. Under abominable conditions as I understand (........digging out the spanner for the sliding curtain out of the mud .........). Thanks a lot Sarah, Steve, Dave and the lorrydriver of course!
Guest - Paul Sturm on Friday, 13 July 2012 22:19

The picture of the recoveryparty standing in front of the electrical cubicle in the shed raises the question to what extent the shed is still "waterproof". the corrugated roofing shows multiple spots where daylight is visible. Items in the shed probably need protection from the rain and I understand some of the items brought on site are in fact sheeted over , am I right?

The picture of the recoveryparty standing in front of the electrical cubicle in the shed raises the question to what extent the shed is still "waterproof". the corrugated roofing shows multiple spots where daylight is visible. Items in the shed probably need protection from the rain and I understand some of the items brought on site are in fact sheeted over , am I right?
Guest - James Andrews on Wednesday, 11 July 2012 09:20

Excellent article and great pics - thanks! It looks like the cubicle has a fair few bits in it still.

Splendid efforts, all.

Excellent article and great pics - thanks! It looks like the cubicle has a fair few bits in it still. Splendid efforts, all.
Already Registered? Login Here
Guest
Tuesday, 24 December 2024

Captcha Image